Grand Prairie Pool Pros provides professional pool resurfacing & replastering in Grand Prairie, TX for homeowners across the DFW Metroplex. Pool resurfacing in Grand Prairie means chipping the failed plaster back to sound gunite and hand-troweling a new interior over it, not painting over what is already there. You can usually feel that it's time before you can see it, when the floor goes from smooth to something between sandpaper and a cheese grater and the kids start climbing out with scraped toes.
That roughness is plaster that has lost its cream coat. In North Texas hard water it happens sooner than the brochures suggest, because our fill water arrives loaded with calcium and the pool spends its life either laying scale down or, when the chemistry swings the other way, dissolving the surface to get calcium back. Etching, staining, gray mottling and a chalky film on your hand are all the same story at different stages.
What you can put back on, cheapest first.
White marcite plaster gets 10 to 15 years here. It's smooth underfoot, it's the right call on a rental or a house you're selling, and it shows every stain our water knows how to produce.
Quartz aggregate sits in the middle and is the one we recommend most often. Polished quartz is harder than plain plaster, holds color far better, and hides calcium etching well. Expect 15 to 20 years.
Pebble finishes like PebbleTec and StoneScapes are the top end, and they're the most forgiving surface for our water. Also 15 to 20 years, often more. Standard exposed pebble is genuinely rough on anyone who likes to sit on the steps, so ask for the polished version if that's you. Glass bead blends look spectacular and are priced accordingly.
The workmanship matters more than the product name. We drain, chip the failed material back to sound gunite rather than skim-coating over it, cut out the hollow spots you can hear with a hammer, patch, apply a bond coat, then trowel the new interior in one continuous application so there are no cold joints to telegraph through in year three.
Tile and coping usually get replaced on the same visit, because the waterline is already exposed and doing it separately means paying twice for the same drain-down.
Then comes the part everybody skips: the startup. Twenty-eight days of daily brushing and staged water chemistry while the surface cures and gives up its own calcium. Balanced alkalinity, no shocking in the first week, and a lot of brushing. Do it and the finish lasts two decades. Skip it and you get scale, blotching or a rough surface within a couple of years, and you'll be reading this page again in six.
When not to resurface. Rough patches in one corner, a few stains, or localized etching can often be spot-repaired and acid-washed for a small share of a full job, and an acid wash on plaster that still has life in it can buy several more years. If your finish is under about eight years old, get a second opinion before anyone puts a hose in your pool and starts draining.
With 15+ years of experience, our insured team brings the right materials and equipment to every job — gunite and shotcrete shells, PebbleTec and polished quartz interiors, white marcite plaster, glass mosaic and porcelain waterline tile, travertine coping and decking, variable-speed pumps — and backs the work with a written workmanship warranty. We serve Grand Prairie and nearby communities including Arlington, Mansfield, Cedar Hill, Duncanville.
The Full Scope
Everything our pool resurfacing & replastering in Grand Prairie covers
One crew, one point of contact, and the full range of pool resurfacing & replastering work in Grand Prairie, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- pool resurfacing contractor
- pool replastering
- PebbleTec and pebble finishes
- quartz aggregate pool finish
- white marcite plaster
- glass bead pool interior
- pool chip-out and bond coat
- etching, staining and calcium scale removal
- pool interior finish colors
- startup and 28-day brushing
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Grand Prairie services.
Materials, equipment and how we do pool resurfacing & replastering
The difference between pool resurfacing & replastering that lasts and pool resurfacing & replastering that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with gunite and shotcrete shells, PebbleTec and polished quartz interiors, white marcite plaster, glass mosaic and porcelain waterline tile, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Grand Prairie job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of pool work in the DFW Metroplex means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do pool resurfacing & replastering outside Grand Prairie
Grand Prairie Pool Pros covers Grand Prairie and the surrounding communities of the DFW Metroplex. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Pool Resurfacing & Replastering in Arlington, TX — Tarrant County, population 394,000
- Pool Resurfacing & Replastering in Mansfield, TX — Tarrant County, population 72,600
- Pool Resurfacing & Replastering in Cedar Hill, TX — Dallas County, population 49,100
- Pool Resurfacing & Replastering in Duncanville, TX — Dallas County, population 40,700
- Pool Resurfacing & Replastering in DeSoto, TX — Dallas County, population 56,100
- Pool Resurfacing & Replastering in Lancaster, TX — Dallas County, population 41,300
Start on the Grand Prairie Pool Pros homepage for a free estimate, or call (844) 224-4694 and describe the job.
Why Grand Prairie Chooses Grand Prairie Pool Pros
- ✓Over 15 years remodeling, resurfacing and building pools across Grand Prairie and the DFW Metroplex
- ✓Specialists in bringing 1980s and 1990s pools up to date: new interiors, tile, coping, decking and equipment
- ✓Shells engineered for Blackland Prairie clay, and equipment specified for North Texas hard water and hard freezes
- ✓Free in-home 3D design so you see the finished backyard before anyone breaks ground
Want a written pool resurfacing & replastering estimate in Grand Prairie?
Call (844) 224-4694 or send the short form — no pressure, same-day reply on most requests.
The standards behind pool resurfacing & replastering
Quality here is not a matter of opinion — it is written down. The pool resurfacing & replastering work we do in Grand Prairie follows published industry standards: Pool & Hot Tub Alliance publishes the ANSI/APSP construction and barrier standards, and American Red Cross water safety sets out the layered-protection guidance every pool owner should read. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every pool resurfacing & replastering project in Grand Prairie gets the same attention, whether it is a single room or the whole property. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 224-4694 for a free pool resurfacing & replastering free estimate in Grand Prairie, or request a quote on our contact page and we'll get right back to you.